Global warming is one of the major environmental issues in the world. Among the various greenhouse gases that cause climate change, carbon dioxide has the greatest impact on global warming. According to statistics, the world emits about 6.5 billion tons of carbon (about 25 billion tons of carbon dioxide) into the atmosphere each year due to the burning of fossil fuels. 70% of carbon dioxide emitted from human activities comes from the burning of fossil fuels, and about 80% of carbon dioxide emissions in my country come from coal burning. The continued increase in carbon dioxide concentration in the air has attracted people's attention. Since the World Climate Conference in Durban, South Africa, research and public opinion on a low-carbon economy and a low-carbon life have gradually become a hot topic and fashion around the world.
In 2005, the Intergovernmental Panel on Climate Change (IPCC) proposed carbon capture and storage (CCS) technology to all countries to significantly reduce greenhouse gas emissions. Since CCS is consistent with the basic structure of the existing energy system and is less restricted by resource conditions, it has attracted widespread attention and attention from industrialized countries as soon as it was proposed: in 2007, the World Wildlife Fund (WWF) identified CCS as one of the six ways to address global climate change; the 2010 Kankun Global Climate Conference included CCS in the Clean Development Mechanism (CDM); the United States, Canada, the European Union, etc. have regarded CCS as an important part of future energy strategies and carbon reduction strategies, formulated corresponding technical research plans, and carried out corresponding research and development and project demonstrations; it is understood that my country has included CCS technology as a cutting-edge technology in the national medium- and long-term science and technology development plan, and has made breakthroughs in related technical fields.
Keywords: carbon dioxide; emission reduction; capture; transportation; storage
CCS Technology
Carbon capture and storage technology refers to the process of separating carbon dioxide from industrial or related energy sources, transporting it to a storage location, and isolating it from the atmosphere for a long time. Carbon capture and storage technology includes three technical links: carbon capture, carbon transportation, and carbon storage.
Carbon capture
Carbon dioxide capture is the first problem to be solved in the entire CCS process. The method is to separate, collect, purify, and compress carbon dioxide from the emission combustion source, reduce the emission of carbon dioxide in the factory, and thus reduce the carbon dioxide content in the atmosphere. The available carbon dioxide capture technologies mainly include pre-combustion capture technology, oxygen-enriched combustion capture technology, and post-combustion capture technology.
Pre-combustion capture technology is used to separate CO2 before the combustion of fossil fuels. First, the fossil fuel is gasified to generate H and CO, CO is converted into CO2, H is burned as energy and converted into H2O, and CO2 is separated. Integrated gasification combined cycle technology (IGCC) is a technology that converts coal into synthesis gas, which is a typical technology for capturing CO2 before combustion.
Oxygen-enriched combustion capture technology refers to the combustion of fossil fuels in pure oxygen or oxygen-enriched air, and the flue gas is mainly CO2 and water vapor, and then the water vapor is condensed to separate CO2.
Post-combustion capture technology refers to the separation and capture of CO2 from the flue gas generated by the combustion of fossil fuels in the air. The main capture and separation methods are chemical absorption (Benfield method, methyldiethanolamine method), adsorption (pressure change, temperature change), physical attraction (polyethylene glycol dimethyl ether method, low-temperature methanol washing method), and membrane separation.
Carbon transportation
Carbon transportation technology is currently relatively mature and widely used. Its main transportation methods are pipeline transportation and tank transportation. Pipeline transportation is divided into gaseous, liquid, and supercritical state transportation. Due to the different phases of the transportation medium, the transportation process is also different. At present, pipeline transportation mainly adopts supercritical state transportation. The main mode of tank transportation is transportation by rail or road.
Carbon sequestration
Carbon sequestration technology is to safely store captured CO2 in geological structures, thereby effectively reducing CO2 emissions to the atmosphere. It is divided into three methods: geological sequestration, marine sequestration, and chemical sequestration.
Geological storage refers to injecting CO2 into different geological bodies such as seabed salt marshes, oil and gas layers, and coal wells. The storage depth of CO2 geological storage is generally below 800 m, because such temperature and pressure can keep CO2 in a supercritical state.
Marine storage refers to storing CO2 in deep sea water or deep seabed by pipeline or ship transportation.
Chemical storage refers to converting CO2 into some stable carbonates through a series of complex chemical reactions, thereby achieving the purpose of permanent storage of CO2.
CCS Technology Analysis
Currently, the research on CCS technology mainly focuses on the following aspects: First, carbon capture, mainly from the economic perspective, that is, how to reduce the economic cost of carbon capture; second, carbon storage, mainly from the environmental risk perspective, that is, how to reduce the environmental risks that may be brought about by carbon storage; third, accumulating practical experience through demonstration projects of CCS technology.
Current Status of Carbon Capture Technology
The oxygen-enriched combustion capture technology in carbon capture technology has no obvious economic advantages due to the high cost of oxygen production, and cannot be widely promoted and used in practical applications; post-combustion capture technology has not been widely used in production practice due to the high equipment investment and operating costs. Although the cost of carbon capture is relatively high, research shows that as the technology continues to mature, the cost of carbon capture will be greatly reduced to a level that people can easily accept. In summary, the cost issue is the bottleneck of the industrialization of carbon capture technology. The research direction of researchers in various countries on carbon capture technology is also mainly focused on how to reduce the economic cost of carbon capture. Below, the author will introduce several new technologies to reduce the cost of carbon capture:
Researchers at Codexis in California, USA, are studying the technology of using genetically modified enzymes to reduce the cost of carbon capture. Carbonic anhydrase helps the solvent methyldiethanolamine to combine with carbon dioxide, but this enzyme can only survive at around 25°C and will immediately become ineffective when the temperature exceeds 55~65°C. The genetically modified carbonic anhydrase obtained through genetically modified technology can survive for half an hour at a temperature above 85°C. This feature enables it to play a role in the high-temperature smokestacks of coal-fired power plants, increasing the absorption efficiency of carbon capture solvents by 100 times.
Japan's JFE Engineering uses water and a special organic compound. When the exhaust gas is mixed with water and the organic compound, the carbon dioxide will be transformed into a jelly-like viscous state at room temperature and near normal pressure. The solid material is then collected and slightly heated, and the carbon dioxide is converted back into gas, and the water and organic compound can be reused. The process costs 200 yuan per ton of carbon dioxide captured in RMB.
Scientists from Rice University, the University of California, Berkeley, Berkeley National Laboratory, and the Electric Power Research Institute studied more than 400 mineral adsorbents and found that zeolites, which are commonly used as industrial materials, can greatly improve the energy efficiency of carbon capture technology. Their analysis shows that many zeolites are more energy efficient than amine solvents in carbon dioxide capture. Zeolite is a common mineral composed mainly of silicon and oxygen. There are 40 species in nature and 160 artificially synthesized species. Zeolites are full of pores inside, which are like micro-reaction containers that absorb and combine chemical substances for chemical reactions.
Researchers from the National Energy Technology Laboratory of the United States conducted a variety of ionic liquids. The physical properties and carbon dioxide absorption mechanism studies showed that among the given ionic liquids, ionic liquids have better selectivity for carbon dioxide. At the same time, it was found that ionic liquids have a high carbon dioxide absorption load and a lower regeneration heat demand. In addition, ionic liquids are different from traditional organic solvents. Due to their low vapor pressure, volatile organic compounds will not be produced during the decarbonization process. In addition, ionic liquids can be used repeatedly.
Risks of Carbon Sequestration
Minister of Science and Technology Wan Gang said in an interview with the media after the third ministerial meeting of the "Carbon Sequestration Leaders Forum" that carbon capture technology is relatively mature, while the application prospects and safety of carbon sequestration technology are still to be considered. The United States, Norway and other countries have injected carbon dioxide into oil and gas fields that have been exploited to squeeze out the remaining oil and gas, which not only increased the oil recovery rate but also extended the service life of the oil and gas fields. However, as Minister Wan said, the risks brought by carbon sequestration should not be underestimated.
Leakage of underground carbon dioxide storage can cause two types of risks:
Global risk, that is, if part of the carbon dioxide in the storage structure leaks into the atmosphere, the released carbon dioxide may cause significant climate change.
Local risk, that is, if carbon dioxide leaks from the storage structure, it may cause carbon dioxide and salt water to enter the aquifer, affect groundwater, and pollute drinking water; it may also cause local disasters to humans and ecosystems.
The risks of carbon dioxide ocean storage are:
Carbon dioxide dissolved in water will increase the acidity of the water. Of course, it is also possible to add certain alkaline minerals to neutralize the acidity of carbon dioxide. However, from the current experiments, CO2 injection into the ocean will have a certain impact on organisms near the injection point in the short term, and the long-term impact on the marine ecosystem needs further observation. In addition, the retention time, morphological changes, and migration direction of CO2 in the deep sea after injection also need long-term monitoring.
As a new technology for storing CO2, chemical CO2 storage still has many unpredictable aspects in terms of economic benefits and emission reduction efficiency.
Conclusion
This paper briefly introduces the background and technical connotation of CCS technology, and discusses the current status of carbon capture development and the research direction of reducing its economic cost, the risk analysis of carbon sequestration, and some current international and domestic engineering applications. In general, the application prospects of CCS technology are broad, and the current problems should be temporary. As a major carbon emitter, my country should conduct in-depth research in this field and carry out relevant engineering projects. In addition, the author also uses this article to express some immature views: we should not only look at CCS technology from the perspective of technical difficulty, economic cost, and risk, but also from the perspective of the global biosphere. The cause of global warming is the excessive emission of greenhouse gases. The greenhouse gases, mainly composed of carbon dioxide, brought by human industrial civilization, will inevitably become part of the Earth's carbon cycle. Before industrial civilization, the Earth's carbon cycle was relatively simple and long-term balanced. Simply put, plants consume carbon dioxide and animals produce carbon dioxide, and the two form a balance. The emergence of industrial civilization broke this simple balance. The supply of carbon dioxide exceeded consumption, so excessive greenhouse gas emissions led to global warming. Therefore, how to consume excess carbon dioxide greenhouse gases without affecting the ecology of the Earth's biosphere is the key to the problem. This requires not only the application of science and technology, but also political wisdom, cultural communication, and economic means. Excessive greenhouse gas emissions are caused by human civilization, and I believe that human civilization will inevitably find a way to resolve its impact!
