Welding Gas ASU

Welding Gas ASU

Welding Gas ASU is a piece of equipment that separates air into its constituent gases, primarily oxygen, nitrogen, and argon. These gases are essential for various industrial applications, including welding. ASUs utilize cryogenic distillation, a process that cools air to extremely low temperatures to separate the gases.
Send Inquiry
Description
Technical Parameters
Usage Process

After being filtered, compressed, and pre-cooled, the air passes through a molecular sieve to remove moisture and impurities before being sent to a heat exchanger for cooling.

 

The cooled air enters the upper and lower distillation columns. The lower column produces liquid air and liquid nitrogen, while the upper column further separates pure liquid oxygen and pure nitrogen.

 

The liquid oxygen and liquid nitrogen are output as products, and a portion of the nitrogen is heated and used to regenerate the molecular sieve, forming a closed-loop system.

Welding Gas ASU
Welding Gas ASU
Engineering conditions

Atmospheric pressure: 100 kPa (A)
Ambient temperature: 32°C
Relative humidity: 80%
Altitude: 100 m
Atmospheric oxygen content: 20.95% O₂
Average annual temperature: 19.3°C
Maximum temperature: 43°C
Minimum temperature: -5°C
Pressure: 0.5 MPa(G)
Temperature: 30°C
Dew point: 35°C
Flow rate: Approximately 300 m³/h

FAQ

 

Why is oxygen used in welding and how is it produced?
Why is oxygen used in welding? How is it produced?
Oxygen supports combustion and increases the temperature of the welding flame. Air is cooled and distilled in an air separation unit (ASU) to separate high-purity oxygen.

 

What is the difference between welding oxygen and medical oxygen?

Both have similar purities (typically ≥99.5%), but medical oxygen requires higher hygiene standards and certifications; welding oxygen is used in industrial applications and does not require medical-grade certification.

 

Is Welding Gas ASU the best method for producing industrial gases for welding?

Are air separation units the best method for producing industrial gases for welding?
Yes, ASUs are suitable for medium to large gas volume applications. They provide a continuous and stable supply of high-purity gas and are more economical and reliable than bottled gas or purchased liquids.

 

 

 

 

 

Hot Tags: welding gas asu, China welding gas asu manufacturers, suppliers

Send Inquiry