In recent years, with the development of large-scale air separation technology in my country, many factories have introduced advanced foreign technologies, and more and more independent innovation technologies have been applied to them, and air separation devices are one of the important products at present. In the process innovation of double pump internal compression process, we should also pay attention to safety issues and innovative performance issues, so as to provide guarantee for the improvement of economic benefits of enterprise factories.
Content
1 Key methods of air separation
1.1 Air separation process technology of pressure swing adsorption
1.2 Process technology of membrane separation
1.3 Process technology of cryogenic distillation
2 Technical principles and process flow of dual pump internal compression in large air separation units
3 Practical process innovation strategies
4 Conclusion
1 Key methods of air separation
Air separation mainly includes two forms: cryogenic and non-cryogenic. The latter methods include adsorption, membrane separation and chemical separation. Due to the large demand for large-scale production of liquid products of oxygen and nitrogen, especially for high-purity products, the cryogenic separation method has an irreplaceable competitive advantage. Moreover, the cryogenic separation method is the most effective method to achieve the simultaneous production of different rare gases such as argon. Therefore, the cryogenic method is the most important technology in the current industrial application of air separation.
For the pressure swing adsorption method, it was developed in the late 1950s. It has been widely recognized for its unique flexibility, relatively low investment and low energy consumption. In recent years, the oxygen enrichment technology of pressure swing adsorption air separation has also been widely used in various fields. As a technology that emerged later, membrane separation air separation technology involves the field of polymer materials and has gradually been recognized and widely used.

The basic principle of pressure swing adsorption separation technology is to meet the separation requirements of nitrogen and oxygen in the air based on their different adsorption rates. The most critical part of this process is the adsorption tower, which can achieve the effect of gas adsorption. In this way, the alternating cycle between oxygen and nitrogen can be effectively met, thereby achieving the effect of continuous reproduction.
1.2 Process technology of membrane separation
The principle of membrane separation technology is to effectively achieve separation effect according to the difference of solubility and permeability in the membrane. When the gas penetrates the membrane, under the action of external drive and pressure difference on both sides of the membrane, under the condition of different permeabilities, the gas will gather at different positions of the membrane, so as to meet the effect of gas separation. The membrane separation technology must be easy to install and operate. The actual noise is relatively small, the area occupied is also limited, and the startup time is short. However, the membrane cannot be used after aging, so there will be more expensive maintenance costs, and the purity of the gas will also deteriorate. Membrane separation is a high-tech form in the current world development. It is a polymer material science. Because membrane separation has no phase change and does not need to be regenerated, membrane separation technology has the advantages of advanced technology and low investment. Membrane separation technology has been widely used at present. It can recover the corresponding hydrogen from the air released by synthetic ammonia, extract helium from natural gas, and recover carbon dioxide. Synthetic gases such as methanol can also be adjusted. In addition, gas membrane separation technology can also be used in air separation, which can directly produce nitrogen with a purity of up to 99.9%; this method can also directly produce oxygen-rich air with a concentration of more than 50%.


1.3 Process technology of cryogenic distillation
The so-called low-temperature distillation process uses the different boiling points of oxygen and nitrogen to achieve the separation effect. Moreover, high temperature and low pressure can affect the boiling point of the gas. Therefore, the process mainly uses high pressure and low temperature environment to liquefy the air, and after distillation mass transfer and heat transfer in the distillation tower, nitrogen and oxygen are effectively separated from the air. The main advantage of this process is that the gas output is relatively large, and the purity of the separated gas is very high. The effective use of the double pump internal compression process will make its investment lower, and the safety performance will also be improved, which is convenient for later operation. The compressed air will pass through the molecular sieve adsorber to effectively remove impurities, mainly water, CO2 and hydrocarbons, and then pass through the heat exchanger to cool the low temperature, and finally separate oxygen, nitrogen, argon, etc. in the distillation tower. The device requires cold capacity, which is obtained by the work of compressed air and compressed nitrogen expansion. In addition, in the position distillation process, its structured packing technology is also a common process. Under the current environment, the form of structured packing has been effectively promoted and popularized. It can achieve the effect of continuous heat and mass exchange and can also meet the effect of reducing energy consumption. Moreover, the structured packing can efficiently separate oxygen, nitrogen and argon to ensure that the purity of each gas is further improved. In addition, the structured packing can achieve a wide range of changes and operation requirements, and can also play a role in rapid adaptation in variable operating conditions. In actual operation, the technology of full distillation hydrogen-free argon production is also an important form of cryogenic distillation work. The technology of full distillation hydrogen-free argon production is promoted on the basis of structured packing during development, and its full distillation hydrogen-free argon production has obvious effects and advantages in the use of many large-scale equipment. Moreover, this technology also has strong safety performance, its process flow is relatively simple, the overall operation is very convenient and effective, and the purity of the argon produced by the technology is also very high, but the cost of this technology is very high and the reliability is relatively poor.
The cryogenic deep-freezing technology for actual conditions mainly compresses and deep-freezes the air to form a liquefied state. It is mainly based on the different boiling points of air components such as oxygen and nitrogen. The physical properties of the air components to be separated under atmospheric pressure are generally shown in Table 1. Then the oxygen and nitrogen mixture is separated by distillation. The nitrogen of the low-boiling point component and the oxygen of the high-boiling point component are exchanged between mass and heat through the distillation tray. The nitrogen can evaporate from the liquid phase, and the oxygen can be converted from the condensation of the gas phase to the liquefied form, thereby achieving the effect of oxygen and nitrogen separation. For the double-pump internal compression process technology, its principle is to use the expanded air to enter the lower tower. Liquid oxygen will be extracted from the main cold, and it will pass through the compression system of the liquid oxygen pump to the user pressure system, and then enter the user pipeline after reheating by the main heat exchanger. In the main heat exchanger, the positive flow compressed air and the pressurized liquid oxygen will realize heat exchange, and the liquid oxygen will be vaporized and reheated, and the high-pressure air will then be cooled and liquefied. For the positive flow high-pressure liquefied air and after the perfect expansion and cooling by the booster expander, the air will enter the lower tower, thus meeting the distillation requirements. The internal compression process is the process of pressurizing the air with the help of a liquid oxygen pump, which can replace the oxygen compressor effect of the external compression process.
The specific process of this technology is that the air is filtered by the air filter, compressed by the air compressor, and cooled by the air cooling tower before entering the distillation tower. The nitrogen and oxygen are separated and output separately by using the different boiling points of nitrogen and oxygen. The application of the double pump internal compression principle reduces the power consumption under full load by 6% and greatly shortens the system start-up time.
The advantages of this process are relatively large, so it has been widely used. It has the effect of eliminating the aggregation of hydrocarbons, eliminating the risk of explosion, and can make the liquid oxygen flowability stronger, making the device safer and more reliable, especially during operation. In the process of double pump internal compression, the investment cost of liquid oxygen pumps and liquid nitrogen pumps is less than that of external compressors, and the overall operation is also very simple, which is easier to inspect and repair. In addition, its automated control system can make the operation of the overall system more convenient, which is of great help in improving work efficiency and making the operation efficiency more reliable and effective.




3 Practical process innovation strategies
With the rapid development of current science and technology, its low-temperature air separation technology has been further optimized and developed. In the early development, it also focused on increasing the product extraction rate, focusing on the purification of the original air, and also put forward certain requirements for the improvement of the efficiency of the heat exchanger and the optimization of the device control. Therefore, in the actual development of large-scale air separation devices, attention should be paid to the research and innovation of the double-pump internal compression process technology to provide guarantees for the improvement of the air separation process level.
Renovation and optimization for the purpose of reducing power consumption. For air separation devices, when they are turned on, the operating cost will increase due to high power consumption. In order to reduce its power consumption, it is necessary to optimize and improve it, thereby effectively controlling the overall cost.
Adjusting the variable load has the characteristics of continuous chemical production, and the subsequent processes may affect the load changes in production. In order to ensure the load stability of the system and ensure that the quality and output of its products are not affected, it is necessary to innovate and optimize it, resolve the contradiction, make the output and quality not affected by the system, and ensure the effective implementation of the overall work.
Strengthen the allocation of high-pressure air volume. The load in the air separation unit can be adjusted according to the demand. Due to the large adjustment range and the large fluctuation of high-pressure nitrogen consumption, it is easy to cause the problem of cold loss in the system. Therefore, it is necessary to innovate and transform the air separation unit, and add ball valves to the unit to better control the cold loss of the system.
The development of my country's petroleum and chemical industry is gradually moving towards science and technology, specialization and scale. In the development of the air separation process, it has also undergone various forms of replacement and updating. After innovation, its overall effect has been further improved, which also provides a guarantee for the effective use of air separation process technology, so that air separation products can be effectively used in various industries and play their own advantages and roles.
