Exergy Analysis Of Cryogenic Air Separation

Apr 12, 2025

Leave a message

Today,many of the gases separated from the air,such as nitrogen,oxygen,and hydrogen,are being used moreand more widely.So,how to separate more useful gas from the air to recycle,so as to meet people's more needs? This paper intends to analyze the two methods from the cryosurgical analysis and the membrane separation method,and find the best air separation device through the principle of each principle,so as to effectively recover the various active ingredients in the air and improve the utilization efficiency of the resources.
 
Content
 
 
Valve Design Of Air Separation Unit

 

Cryogenic separation, in simple terms, is to separate gases to the greatest extent possible through different temperatures. It mainly adopts a mechanical method, such as expanding the gas through different means, and then cooling them according to the different boiling points of various gases. Different gases are separated more accurately in this way. In my country, 80% of oxygen production comes from this method. The gas separated by this method has relatively high accuracy, but the cost in the separation process is also high. This method is more suitable for the separation of gases with a larger specific gravity in the air, such as nitrogen and oxygen. However, when separating gases with a smaller proportion in the air, it shows its shortcomings and limitations. Although we have been working hard to improve technical management and have made considerable achievements, the level still needs to be further improved.
Membrane separation is a new generation of gas separation technology compared to the existing air separation technology. It mainly uses a certain pressure to effectively separate the various components in the gas according to the different attachment, dissolution and diffusion of the gas molecules to be separated in the gas on the membrane surface. Compared with the cryogenic separation method, its main feature is that it does not have any chemical reaction, does not use any chemical additives, has low cost, consumes less energy, has strong adaptability, has low requirements for the size of the device level, has a high safety factor, is highly reliable, and of course has a wide range of applications. In today's society, this technology is relatively mature and has been widely used in many fields of gas separation. At the same time, the huge economic and social benefits brought by this technology have become one of the most important means of separation technology. It is praised by developed countries for its creative recreation of more available resources and is a technological advancement that mankind is proud of. The membrane separation method is constantly developing, and the material of the membrane is constantly being updated. The materials used for membranes include various natural materials, such as various cellulose derivatives, etc., as well as artificial materials, such as various synthetic polymers, and some special materials. In recent years, some emerging membrane materials have been developed, such as composite membranes, nano-material filtration membranes, functional polymer membranes, etc. Relevant scholars have also predicted that innovation and breakthroughs in membranes will become the key to influencing this technology.
The working principle of cryogenic separation method in air separation is relatively simple. It takes air as raw material and goes through a series of procedures, including large-scale concentration, step-by-step purification, and the use of heat exchange to liquefy the air into liquid air. It is roughly as follows: before entering the compressor, the air must be filtered through the air filter device to make it purer before entering the air compression device. After being compressed to a suitable pressure, it enters the air cooling device to rapidly reduce the temperature of the air. On this basis, the air is dried, which can be done through an air dryer purifier to remove some unnecessary substances in the air, such as moisture, carbon dioxide and other substances. In the setting of the air separation device, it is also necessary to ensure that the two liquid flows are well treated and collected. On the one hand, after the air is purified, it must be ensured that it enters the main heat exchange and heating container in the air separation device. The liquid gas that has not passed through, that is, the returned liquid gas, reaches the optimal temperature through the cooling device, and then is sent to the bottom of the purification distillation container. The nitrogen can be fully collected in the upper part of the container, and the liquid air at the bottom is condensed again. It is condensed and evaporated through a series of condensing devices. The nitrogen is finally condensed, and some of the retained liquid is finally set up in sections. Of course, it can also flow into the main heat exchange and heating container again, and then enter the expansion container to expand and cool down when it reaches a certain level. Part of the gas can be separated and reused again, and the rest will be discharged into the atmosphere. It can be seen from this that to establish an air separation device, on the one hand, the deep compression and reduction of the air and the thorough purification of the air are achieved; on the other hand, it is the final separation of the air. Of course, the liquid nitrogen separated from the air should also have a special container for liquid storage and transportation. When inspecting its equipment, it is necessary to ensure that the liquid nitrogen is well sealed and safely enters the corresponding container.
From a molecular perspective, membrane separation refers to a technical method that continuously selects and separates a mixture of molecules with different particle radius when passing through a membrane. It also has the functions of uninterrupted separation, high-quality concentration, large-scale purification and refinement of substances contained in the gas, including electrodialysis, reverse osmosis, ultrafiltration and dialysis. Its working principle is mainly to utilize the characteristics of the polymer membrane contained in the gas, that is, to selectively permeate certain tiny particles contained, such as molecules, ions or certain fine particles that are selected to pass through, etc. Separate. While selectively permeating, a certain pressure is applied to it in a certain way, and then the original liquid flows along the surface of the membrane with a filtering function at a certain speed. Molecules larger than the membrane with a filtering function cannot flow through, and can only continue to return to the original place, while those molecules smaller than the membrane with a filtering function can pass smoothly and form a new outlet. It can be seen that in the separation process, the membrane plays a very important role. Especially in the air separation process, the partial pressure difference of the permeating substances on both sides of the membrane causes the gas substances to be continuously separated.

In the application process, if nitrogen is to be completely separated from the air, the compressed air must first pass through the fiber membrane with an empty space in the middle of the device. While passing through this membrane, a large amount of gas contained in the air, such as oxygen, carbon dioxide, carbon monoxide and water vapor, will pass through the pipe gap of this fiber membrane and enter the atmosphere for discharge. At the same time, at the outlet of the membrane, all nitrogen molecules and argon with larger molecular size are collected and enter the relevant application equipment. The highest purity of nitrogen extracted in this way is as high as 99.5% or more, which is relatively high. Of course, to separate nitrogen, oxygen, etc. from the air, it can also be done by changing the pressure to adsorb the technology. This technology is to separate various components in the air through a solid medium, and the solid medium required is a molecular sieve whose main component is carbon. This molecular sieve itself has the characteristics of being porous and loose, so the compressed air must first be filled into a sealed container filled with a molecular sieve filled with carbon elements. Since the main components of compressed air are nitrogen, oxygen and a small amount of argon and water vapor. In addition, nitrogen and oxygen have different molecular sizes. As a carbon element with strong adsorption power, molecular sieves will first adsorb the water vapor and oxygen contained in it, that is, let the particles with smaller molecular size enter, while nitrogen cannot be adsorbed due to its larger molecular size and will inevitably be retained. In this way, the separation of effective gases in the air can also be achieved through this device.

With the rapid development of membrane technology, it also provides a better guarantee for us to achieve air separation. From the continuous change and innovation of membrane materials to the continuous progress and improvement of technology, from the obvious backwardness of our country to the major achievements that can be made now, all of them are joy. With the continuous development of technology, I believe that air separation devices will become more and more perfect, and the purity of separation will become higher and higher.
In the face of the extreme shortage of resources in today's society, which can no longer meet people's needs, it is particularly important to carry out separation in a planned manner based on existing materials. I hope that the theoretical viewpoints of the deep cold separation method and membrane separation method I have studied can provide inspiration and encouragement to everyone. I also hope that everyone can work together to make our own efforts for the reuse and creative use of resources, so that our resources will be more sufficient and our lives will be better.
Send Inquiry